View TGL2207-SM_8436063.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 1 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com 5 mm x 5 mm qfn package pad configuration pad number symbol 5 rf input 22 rf output 1, 2, 4, 6, 8, 9, 16, 17, 19, 21, 23, 24, 25, 32 gnd 3, 7, 10-15, 18, 20, 26-31 no connection note: the rf input and output ports are not interchangeable. applications ? receive chain protection ? commercial and military radar general description the triquint TGL2207-SM is a high power, wideband gaas vpin limiter capable of protecting sensitive receive channel components against high power incident signals. the TGL2207-SM does not require d c bias and achieves a low insertion loss all in a sma ll form factor. these features allow for simple integration with minimal impact to system performance. the TGL2207-SM operates from 2.0 to 6.5 ghz with low insertion loss of less than 1.0 db. it can limi t up to 100 w incident pulsed-power with a low flat leakage of less than 15.5 dbm. the TGL2207-SM is offered in a 5x5 mm air-cavity qf n packaged limiter comprised of an aluminum-nitride base with a plastic epoxy-sealed lid. it is well su ited for both commercial and defense related applications. lead-free and rohs compliant. evaluation boards available on request. product features ? frequency range: 2.0 to 6.5 ghz ? insertion loss: < 1.0 db ? peak power handling: 100 w (pulsed) ? flat leakage: < 15.5 dbm ? passive (no dc bias required) ? integrated dc block on output ? spike leakage < 16.0 dbm ? recovery time < 115 ns ? package dimensions: 5.0 mm x 5.0 mm x 1.45 mm functional block diagram ordering information part eccn description TGL2207-SM ear99 2.0-6.5 ghz 100w vpin limiter
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 2 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com absolute maximum ratings parameter value incident power, cw or pulsed, 50 , 25 c 100w incident power, cw or pulsed, 50 , 85 c 70w mounting temperature (30 seconds) 320 c storage temperature -40 to 150 c operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of th e device at these conditions is not implied. recommended operating conditions parameter value passive ? no bias electrical specifications are measured at specified test conditions. specifications are not guaranteed over all operating conditions. electrical specifications test conditions unless otherwise noted: 25 c, tune d evb results parameter min typical max units operational frequency range 2.0 6.5 ghz insertion loss < 1.0 db input return loss 15 db output return loss 15 db flat leakage power at p in > 30 dbm < 15.5 dbm pulse recovery time < 115 ns spike leakage < 16.0 dbm insertion loss temperature coefficient 0.003 db/ c thermal and reliability information parameter test conditions value units incident power (168 hours rf operational life test (1) ) frequency = 4.5 ghz, cw, 50 , 25 c 31 w frequency = 4.5 ghz, pulsed, pw=10 us, dc=10%, 50 , 25 c 100 w notes: 1. test was terminated at 168 hours. insertion los s remained 1 db for device under test.
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 3 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance ? tuned evb performance test conditions unless otherwise noted: 25 c -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 0 1 2 3 4 5 6 7 8 insertion loss (db) frequency (ghz) insertion loss vs. frequency vs. temp. - 40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 0 1 2 3 4 5 6 7 8 input return loss (db) frequency (ghz) input return loss vs. freq. vs. temp. - 40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 0 1 2 3 4 5 6 7 8 output return loss (db) frequency (ghz) output return loss vs. freq. vs. temp. - 40 c +25 c +85 c
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 4 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance ? tuned evb performance test conditions unless otherwise noted: 25 c, cw input power 0 2 4 6 8 10 12 14 16 18 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. freq. 2.0 ghz 3.0 ghz 4.0 ghz 5.0 ghz 6.0 ghz temp. = 25 c 0 2 4 6 8 10 12 14 16 18 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. temp. frequency = 3.5 ghz - 40 c +25 c +85 c 11 12 13 14 15 16 17 30 32 34 36 38 40 42 44 46 48 50 output power (dbm) input power (dbm) output power vs. pin vs. frequency 2.1 ghz 2.5 ghz 3.0 ghz 3.5 ghz 3.7 ghz cw pin, temp. = 25 c 11 12 13 14 15 16 17 36 38 40 42 44 46 48 50 output power (dbm) input power (dbm) output power vs. pin vs. frequency 2.1 ghz 2.5 ghz 3.0 ghz 3.5 ghz 3.7 ghz pulsed pin: 100us/10%, temp. = 25 c
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 5 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com note: the rf input and output ports are not interch angeable. pad description package pad symbol description 1, 2, 4, 6, 8, 9, 16, 17, 19, 21, 23, 24, 25, 32 gnd on pcb, multiple vias should be employed under the center pad (33) to minimize inductance and thermal resistance; see page 9 for suggested mounting configuration. 5 rf input input, matched to 50 ohms, not dc blocked 22 rf output output, matched to 50 ohms, dc blocked 3, 7, 10-15, 18, 20, 26-31 nc no connection
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 6 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com applications information evb layout rf layer is 0.020? thick rogers ro6202, r= 2.94. metal layers are 1-oz copper. microstrip 50 line width is 0.050?. the microstrip line taper at the connector interface is optimized for the southwest microwave end-launch connector 1092-02a-5. the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended.
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 7 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com mechanical information package information and dimensions (units: millimet ers) the TGL2207-SM will be marked with the ?yyww? desig nator and a lot code marked below the part designat or. the ?yy? represents the last two digits of the year the part was manufactured, the ?ww? is the work week, and the ?mxxx? is an auto-generated number. this package is lead-free/rohs-compliant. the packa ge base is aluminum nitride and the plating materia l on the leads is gold over nickel (au-ni). this package is compatible with both lead free and tin-lead solderi ng processes. the lid is plastic.
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 8 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com mechanical information (continued) mounting configuration notes: 1. ground / thermal vias under the dut are critical for the proper performance of this device. 2. the evb shown herein utilizes copper filled vias (8 mil diameter) under the dut to maximize heat tr ansfer away from the dut under large signal conditions. 3. thermal dissipation is low for normal non-limiti ng operation.
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 9 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com recommended soldering temperature profile
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 10 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: tbd value: tbd test: human body model (hbm) standard: jedec standard jesd22-a114 solderability compatible with the latest version of j-std-020 lea d free solder, 260 c. msl rating tbd at 260 c convection reflow the part is rated moisture sensitivity level tbd jedec standard ipc/jedec j-std-020. eccn u.s. department of commerce: ear99 rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free
TGL2207-SM 2.0-6.5 ghz 100 watt vpin limiter datasheet: rev - 05-14-14 - 11 of 11 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about triquint: web: www.triquint.com tel: +1.972.994.8465 email: info-sales@triquint.com fax: +1.972.994.8504 for technical questions and application information : email: info-products@triquint.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the informat ion contained herein. triquint assumes no responsibility or liability whatsoever f or any of the information contained herein. triquint assumes no responsibility or liability wha tsoever for the use of the information contained he rein. the information contained herein is provided "as i s, where is" and with all faults, and the entire ri sk associated with such information is entirely with the user. all information contained herein is subject to chan ge without notice. customers should obtain and verify the latest relevant information bef ore placing orders for triquint products. the info rmation contained herein or any use of such information does not grant, expl icitly or implicitly, to any party any patent right s, licenses, or any oth er intellectual property rights, whether with regard t o such information itself or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life- sustaining applications, or other applications where a failure would rea sonably be expected to cause severe personal injury or death.

▲Up To Search▲

Price & Availability of TGL2207-SM

	To Download TGL2207-SM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .